SAM | Remedial Membranes | US | Clear Slip Resistant Coating

Are Your Surfaces Slippery When They Are Exposed To The Weather?

Clear Slip Resistant Coating

Are Your Surfaces Slippery When They Are Exposed To The Weather?

It seems like these days when buildings are being designed that sometimes surfaces are not being made slip resistant in line with environmental requirements for reducing liability

Create a Slip Resistant Finish With Remedial Membranes

Now you don’t need to change the look of the existing tiles to achieve a slip resistant finish.

Simply apply the Clear Waterproofing Membrane for:

  • Stone Foyers
  • Internal areas like slippery timber stair cases
  • External surfaces including tiled and concrete areas that you wish to make slip resistant

26.4m2 or 284ft2: 4L or 1Gallon Kit and selected the aggregate to meet the desired rating

66m2 or 710ft2: 10L or 2.6 Gallon Kit and selected the aggregate to meet the desired rating

Choose from our options:

  1. P3 Mild or Standard; This option is used for all waterproofing in wet areas. It's easy to clean & not noticeable. P3rating 10ml or half tablespoon of Standard Aggregate per m2 or 10.7ft2

    Ideal for smooth surfaces. If your surface is already a little slip resistant then you may prefer to go for either medium rating. If your tile is light to medium and high rating if your tiles is dark as you will lose some slip resistance in the highs and lows of the current tile profile.

  2. P4 Medium; Harder to Clean, and P4Rating 20ml or 1 tablespoon of Standard Aggregate per m2 or 10.7ft2 because of the increased aggregate can leave a cloudy appearance. It's recommended for use on light to medium colored tiles.

    Ideal for slip surfaces that have existing slip resistance to them and are light to medium in color.

  3. P5 High; suitable for surfaces seeking high slip resistance externally. The aggregate is able to be seen in the sun reflection. Suitable for all colored surfaces including tiles. 10ml or half a tablespoon on Increased Aggregate per m2 or 10.7 ft2

    Ideal for surfaces of any color and texture.

  4. Very High; suitable for surfaces seeking high slip resistance externally potentially too high for internal use. 20ml or 1 tablespoon of Increased Aggregate per m2 or 10.7ft2

    Due to increase aggregate membrane can appear slightly cloudy and recommended to light to med colored tiles.

    Ideal for surfaces of light to medium color

Shop Products Now

Mild P3

1 Gallon Slip Resistant Kit

Suitable for a small external deck between 3-12m2 please refer to installation manual

Medium P4

1 Gallon Slip Resistant Kit

Suitable for a small external deck between 3-12m2 please refer to installation manual

High P5

1 Gallon Slip Resistant Kit

Suitable for a small external deck between 3-12m2 please refer to installation manual

Mild P3

Large Slip Resistant Kit

Suitable for an external deck between 8-30m2 please refer to installation manual

Medium P4

Large Slip Resistant Kit

Suitable for an external deck between 8-30m2 please refer to installation manual

High P5

Large Slip Resistant Kit

Suitable for an external deck between 8-30m2 please refer to installation manual

Wet Pendulum Test Method completed by NATA Accredited laboratory please request copies if required.

Samples were completed on a smooth surface. If your surface is already in all applications the suggested aggregated is mixed into the liquid and applied as normal with continuous mixing necessary to keep the aggregate from settling.

If you are a company you have the ability to request a presentation folder of tiles samples to feel the textural difference between the aggregates.

Nata Accredited Certification

P3 Certificate
P4 Certificate
P5 Certificate

Warranty Certificate